Super Plus Semi-Automatic Pallet Wrapper - Not Including Forklift System

£8,755.00

Contact us for our best price 01639 890609

Place a pallet on the turn table of this low profile turntable pallet wrapper and the Super Plus pallet wrapper will automatically attach the film, wrap, cut and heat seal the film. .

Along with an infrared/radio remote control, these four systems allow the operator to be free from all manual work, and the fork lift driver to not need to get off the fork lift increasing safety and saving time and increasing efficiency.

Technical Details

Height: 2473 mm

Width: 1650 mm
Length: 2804 mm
Turntable height: 80 mm
Weight: 600 Kg
Power supply: 230 VAC VAC 3PH+N
Power absorption: 2 kW

Specifications

Automatic cycle for film hooking, pallet wrapping, film cold cutting and film hot sealing

Air device to blow up the film tail
Power pre-stretch carriage
Electronic printed circuit board for the management of the cycle
Frequency controller for carriage speed adjustment
Frequency controller for turntable speed adjustement
Loading plate ø 1800 mm
Maximum height of pallet: 2300 mm
Maximum size of the pallet: 800x1200 mm
Maximum loading weight: 2000 kg
Photocell for pallet height detection
Safety stop at the base of the carriage
Stop at 0 position
Power board IP54
3 password levels (including lock password)
Adjustable parameters by the control panel without password: cycle selection, bottom laps, top laps, topsheet cycle parameters, rotation speed, carriage ascent speed, carriage descent speed, film tension, starting wrapping height
3 working cycles: ascent/descent; topsheet; layers
Storage of 32 end user programs
3 working ways: semimanual, semiautomatic, fixed height
Strenghtening operation
Acoustic warning at the cycle beginning and stop
Autodiagnostic
Wrapped pallet counter
Receiver for infrared/radio remote control
Powder coating
Braked turntable at the end of the cycle