It has everything is needed: inverter for rotation motor, inverter for carriage motor, carriage with electro-magnetical clutch or power pre-stretch system, a wide range of options and programmes to meet every requirement. In the design process every detail has been carefully conceived to be rational: weight, dimensions, materials, electronics, wiring, assembly and transport.
The result is C-One Base: those who believe that low prices and quality can not be found in the same machine will be proven wrong.
- Electronic printed circuit board for the management of the cycle
- Frequency controller for turntable speed adjustment (from 3 to 12 RpM)
- Frequency controller for carriage speed adjustment (speed going up and speed going down can
- be set differently)
- Loading plate ø 1500 mm
- Maximum wrapping height: 2200 mm
- Maximum size of the pallet: 800x1200 mm
- Maximum loading weight: 1200 kg
- Electromagnetic brake for film stretching
- Photocell for pallet height detection
- Safety stop at the base of the carriage
- Stop at 0 position
- Power board IP54
- 4 digits display
- 2 access keys (including lock mode)
- Adjustable parameters by the control panel: cycle selection, bottom turns, top turns, rotation
- speed, carriage speed going up, carriage speed going down, film tension.
- Many parameters available at upper password level
- Reinforcing operation
- 3 working cycles: ascent/descent; topsheet; only ascent
- 3 programs can be saved by the customer
- “Playback” special cycle
- 2 working ways: semimanual, semiautomatic.
- Acoustic warning at the cycle beginning and stop
- Powder coating
- Braked turntable at the end of the cycle
- 2 years warranty
1650 mm turntable
2000 kg max pallet weight 2500 mm wrapping height Ramp
Photocell for dark loads Power pre-stretch carriage