IBIS Packaging Solutions
     
 
 
 

IBIS CC200PS Wrapper

Auto Cutoff, Auto Attach

Huge film savings

Up to 300% power pre stretch

6 Programs

Remote control

2 tonne turntable

Password protected control settings

 

 
   

TURNTABLE

  • 1650mm diameter turntable standard.
  • Turntable height 80mm with turntable top plate thickness 10mm
  • Turntable with slewing ring and satellite bearings allowing load capacity of 2000kgs
  • Turntable chain driven
  • AC drive 5-12 RPM, with soft start controlled through inverter
  • Fixed starting and stopping point
  • Turntable jog control as standard
  • Fork lift portability   from both front and rear for easy lift and relocation
  • High gear ratio on turntable drive gearbox preventing turntable idle rotation

TOWER

  • Structural steel construction, all metal, hinged to facilitate lowering for transport
  • Strong rigid throat between turntable and tower, to meet CE regulations
  • Maximum wrap height 2500mm with standard machine.
  • Film carriage lift counter balanced with double chain drive, no slippage/no stretching
  • Dual chain detection device for operator safety
  • Automatic pallet height detection with "magic-eye"

FILM CARRIAGE

  • On control side of the machine, for easy operator access
  • For 500mm wide film width, with upto 280mm roll diameter
  • Power pre stretch of film upto 250% with fixed gearing by AC torque controlled inverter
  • Easy thread film roll loading on operator side
  • Film force release at start of wrap cycle for easy pull for film attachment

CONTROLS

  • Touch screen membrane panel
  • Automatic wrapping cycle after push button start
  • Pre-set base & top layers from touch screen in operator panel
  • Film overlapping with film carriage raise and lower speeds adjustable with inverter from touch screen
  • Electronic film lay-on-force
  • Turntable rotation 5-12 RPM adjustable from touch screen
  • Double or single wrapping cycle selection
  • Band wrapping (reinforced wrap) feature
  • Cumulative wrap cycle counter
  • Safety E-stop with safety relay monitoring
  • 6 working cycles including top sheet operation

CC200PS STANDARD BENEFITS

  • Operation standard single phase 240V, 16A electrical supply, controls 24V DC
  • Robust, low profile turntable for easy pallet loading either by ramp or pit mounted flush with floor
  • Double safety switch to monitor film carriage lift chains for operator safety
  • Comprehensive machine operation and service manual supplied with every machine