• IBIS 56, IBIS 58, IBIS 608 Case Erectors - P.O.A

IBIS 56, IBIS 58, IBIS 608 Case Erectors - P.O.A

Case Erector

Currently Unavailable
  • Contact us for pricing £0.00

Description

This product is available to order by phone

Call our sales team on 01639 890609 Mon-Fri 8.30am-5.00pm or
Request a call back Contact us

Dimensions of the Boxes to Form

IBIS 56

Length: 220 to 600 mm
Width: 100 to 500 mm
H1: 150 to 780 mm
H2: 100 to 530 mm

IBIS 58

Length: 220 to 800 mm
Width: 100 to 500 mm
H1: 150 to 780 mm
H2: 100 to 500 mm

IBIS 608

Length: 350 to 800 mm
Width: 150 to 650 mm
H1: 295 to 975 mm
H2: 220 to 650 mm


Machine Description

IBIS 56 - 58 - 608 forms the uniform sized American type boxes automatically and folds the four bottom flaps.
Bent, bolted and painted steel structure. The machine is managed by a dedicated or commercial logic with Eprom and LCD display. Electro-pneumatic drive. Safety guards in transparent methacrylate with safety micro-switch.
The flap folding system performance is assured by the perfect synchronous lever movements. The suction cup system, actioned by a Venturi group, picks the unfolded box from the side gravity (motorized optional) magazine and holds it during the opening. After the forming, the box bottom is sealed with adhesive tape by a GOLDTAPE 50B or hot-melt glue by the GOLDTAPE 50B HM; the box is then sent to a manual or automatic filling station.
The compact dimensions allow GOLDFLEX to be installed in existing lines and to optimize the space.


Technical Data

Weight: 515 Kg (IBIS 56) - 565 Kg (IBIS 58) - 700 Kg (IBIS 608)
Electrical power supply: three-phase, 400 V / 50 Hz 0.4 kW
Service temperature: from + 5° C to + 35° C
Overall plan dimensions: 2170x1670 mm (IBIS 56) - 2170x1870 (IBIS 58) - 2620x2200 (IBIS 608)
Noise level: 78 db
Pneumatic: 6 bar, 22 nl per protection cycle
Electrical protection level: IP 54

 


Product Options / IBIS 56 - 58 - 608
 SINGLE-PHASE ELECTRICS

On request
1-PH

 POSITIVE UNFOLDING DEVICE

Used for square section boxes forming, no need of flap die-cutting modification.
DAP

 PHOTOCELL KIT

Device for automatic operation of the carton erector controlling box overload by photocell.
IA01

 OUTER PEDAL KIT

Each time the pedal is pressed by an operator, the machine ejects a box.
GFA02

 OPPOSITE VERSION

If required the case erector can be built in the opposite sided version.
IA03

 MOTORIZED MAGAZINE (for I56)

capacity 2000mm (a stack of 210/230 unfolded boxes approx)
The collapsed cartons are put on the magazine slider bed and are fed by two independent pulse pneumatic control groups, basing on the requirements of the box forming machine.
MAG562

 STAINLESS STEEL

Heads made of 100% stainless steel, for use in especially aggressive environments.
V-INOX

Call our sales team on 01639 890609 Mon-Fri 8.30am-5.00pm or
Request a call back Contact us