• IBIS 50B Hot Melt Box Gluer - P.O.A

IBIS 50B Hot Melt Box Gluer - P.O.A

Case Erector

Currently Unavailable
  • Contact us for pricing £0.00

Description

Dimensions of the Boxes to Seal

IBIS 50B

Length: 220 mm to 450 mm
Width: 150 to 450 mm
Height: H 175 to 500 mm
(with upper flap up) 


Machine Description

Semi-automatic bottom carton gluing machine manual adjustable on different box sizes. The operator squares the boxes folding the bottom flaps or the boxes arrive from an automatic case former already squared and with the bottom flaps folded. While the boxes pass through the machine the bottom flaps will be slightly opened, to allow the nozzles to spray the hot glue, before the final closure. Before out-feeding the box, a pneumatic pressure group pushes down the flaps from the box inside so as to assure a perfect gripping of the glue. The machine can be either used in a stand-alone version, or combined with one automatic case erector (IBIS 56) or to one semi-automatic case erector (IBIS 56).

Machine frame made of bent, painted and bolted/riveted sheet steel. Safety transparent protections according to the safety standards laws in force (CE certified). 2 vertical timing belts are motorized through one motor. The dimensions of the box to seal are adjusted by acting on hand-wheels.

 

Technical Data

Weight: 290 Kg
Maximum box weight: 6 Kgs for each 100 mm box length
Box transfer speed: 36 metres per minute (higher speed on request)
Productivity: 400/500 boxes/hour
Electrical power supply: Three-phase 400V/50Hz (single-phase upon request)
Service temperature: + 5° C to + 35° C
Electrical protection level: IP 55
Installed power: 0,25 kW
Pneumatic power supply: 6 bar
Air consumption: 6,5 nl
Plan dimensions: mm 2850x1000 (without hot-melt gluer)
Workbench height: 650 mm to750 mm

 

 

Product Options / IBIS 50B HM

  OPPOSITE VERSION

If required the carton sealer can be built in the opposite sided version.
IA10

  STOP&GO KIT (drived belt timed stop)

Energy & pneumatic saver. Electronic device to switch off the machine automatically after cardboard sealing. The operation takes place by cutting off the electric supply to the motor through the interception, by means of photoelectric cell,of outcoming boxes.
IA11

  REDUCED OR INCREASED HIGHT BELTS

Reduced to 40 mm, increased up to 90 mm height belts.
IA12-01

  SET OF LEGS WITH WHEELS

Leg with casters (diameter 80 mm)
IA17

  SET OF ADJUSTABLE LEGS WITH WHEELS

Adjustable legs with casters (casters diameter: 100 mm - legs extension adjustable 0 to 300 mm).
IA18