• IBIS 50, IBIS 65, IBIS 80 Tape Sealers - P.O.A

IBIS 50, IBIS 65, IBIS 80 Tape Sealers - P.O.A

Case Sealer

Currently Unavailable
  • Contact us for pricing £0.00

Description

Dimensions of the Boxes to Seal

IBIS 50

Length: 150 to infinite

Width: 100 to 510 mm

Height: 100 to 510 mm

IBIS 65

Length: 150 to infinite

Width: 100 to 660 mm

Height: 120 to 660 mm

IBIS 80

Length: 150 to infinite

Width: 100 to 810 mm

Height: 120 to 810 mm

 

Machine Description

Semi-automatic manually adjustable carton sealer for the tape sealing of the top and bottom flaps of american type boxes. Bent, bolted and painted steel structure. The changeovers are fast and easy through three adjustments by handles. The boxes are fed by side belts, driven by a single motor ensuring a smooth carton transport.

This solution grants a perfect uniform box sliding, aligning of the flaps and an optimum sealing, through the tape head TU.


Technical Data

Weight: 135 Kg (IBIS50) - 150 Kg (IBIS65) - 175 Kg (IBIS80)

Box transfer speed: 24 metres per minute

Electrical power supply: Three-phase 400V – 50 Hz / single-phase (upon request)

Service temperature: from + 5° C to + 35° C

Electrical protection level: IP 54

Installed power: 0,22 kW


Optional Extras / IBIS 50 - 65 - 80

  SINGLE-PHASE ELECTRICS

On request
1-PH

  THREE-FLAP CLOSER

Device made in galvanised steel which can be installed to speed up the phase of inserting the box in the case sealer. The operator only folds the rear flap, and not all four.
IA03

  KIT RFN TAPE BREAK/END ALARM

Device for bottom or top taping head. It consists of wired roll holder assembly/assemblies with sensors, electronic control card with control panel in polycarbonate and operation disabling button for:
- Checking on use of the tape roll, with a light indicating minimum material available.
- Indicator light and machine emergency stop in case of breakage or end of the adhesive tape.
The device is remotable to allow its connection to main electrical panels.
IA06

  OPPOSITE VERSION

If required the carton sealer can be built in the opposite sided version.
IA10

  STOP&GO KIT (drived belt timed stop)

Energy & pneumatic saver. Electronic device to switch off the machine automatically after cardboard sealing. The operation takes place by cutting off the electric supply to the motor through the interception, by means of photoelectric cell,of outcoming boxes.
IA11

  REDUCED OR INCREASED HIGHT BELTS

Reduced to 40 mm, increased up to 90 mm height belts.
IA12-01

  EXTENDED DRIVING BELTS

Extended driving belts in the in-feed or out-feed of the machine.
IA12-02

  LIFTED DRIVING BELTS

Driving belts lifted from the workbench height.
IA12-03

  SET OF LEGS WITH WHEELS

Leg with casters (diameter 80 mm)
IA17

  SET OF ADJUSTABLE LEGS WITH WHEELS

Adjustable legs with casters (casters diameter: 100 mm - legs extension adjustable 0 to 300 mm).
IA18